What are the plates of the kitchen cabinet? Which material is better for custom kitchen cabinets?




Kitchen cabinets are installed in almost every household. But at this stage, if we have been to some building materials malls, we will find that the price of kitchen cabinets is indeed not cheap. It costs tens of thousands of dollars to make a set of cabinets in a kitchen in an ordinary 100-square-meter house. So why is there such a big difference in cabinet prices? How do we choose to come out? For example, a friend now asks such a question: Which material is better for custom kitchen cabinets? Let's analyze the problems of cabinet panels other than solid wood.

What is a custom kitchen cabinet

There are a lot of customized products in home decoration, and the most popular one is the whole house customization. The whole house customization includes all the decorations such as the hard furnishing furniture in our home. There is also the individual customization of products, which includes the custom kitchen cabinets, custom wardrobes and so on mentioned above. To put it bluntly, it is to customize it as a whole according to the specific size of our home, and make a way to install it in our home.

The advantage of custom-made kitchen cabinets is that they can be processed according to the actual situation of our home. After installation, the overall consistency is very high; it will not cause some pollution in our home, because there will be no cutting boards on site. Custom kitchen cabinets also have its disadvantages, that is, the price is relatively high and the options are relatively less.



What are the commonly used plates in kitchen cabinets

The first is the most common large core board. This kind of board is now very much in the building materials market. The large core board in the home decoration is used as the back board, of course, it can also be used as the board of the kitchen cabinet. However, I do not recommend that you choose this kind of large core board, because the large core board is not very resistant to moisture and deformation. In addition, the environmental performance of the large core board is relatively poor. The biggest advantage of large core boards is the relatively low price.

The second most commonly used board is particle board. It is made of wood particles and glued inside, so its resistance to deformation is very high. However, due to the relatively large amount of glue added, the environmental performance is not very good.

The third commonly used board is plywood, also called multi-layer board. The splint is made by cutting some plants or wood into thin slices, and then pressing them by adding glue. Therefore, the section of the splint can see how many layers are layered.

The fourth commonly used board is MDF, which is made by grinding wood particles into powder and then mixing with glue and pressing. The advantage of MDF is that the surface can be made in various shapes, and it is generally used for door panels.



Which board is better for custom cabinets

The first and preferred board is particle board. Because the particle board is almost always made of plant and wood particles and glue, the only disadvantage is that the environmental protection performance will be worse. However, the particle board has very high load-bearing and deformation resistance capabilities. In addition, the particle board has a very high nail-holding force for our commonly used screws. But for ordinary steel nails, the nail holding force is very poor, but the production of cabinets is basically based on screws, so this is also its advantage.


I personally think that the second choice of plates should be splints. The glue content is relatively small, which means higher environmental performance. In addition, the splint is very high in terms of deformation resistance and bearing capacity. In terms of nail holding force, it is almost similar to particle board, so it is also a good choice for cabinet board.



What we need to pay attention to when choosing plates

The first thing to pay attention to is the environmental performance of the board. Because most of the formaldehyde in our home decoration comes from the glue in the wood, we must choose the certified products when purchasing the boards, and the amount of formaldehyde pollutants must reach the E1 standard. For those plates without any product qualification certificates, it is recommended that you never choose.

The second point is that when choosing a sheet, I personally recommend that you try to choose some well-known products. Because the well-known brand's boards are guaranteed to a certain extent in terms of quality and environmental performance.




(Click on the link below to know more ↓↓↓)
vinyl wrapped kitchen doors reviews
kitchen cupboard doors finishes
vinyl wrap kitchen doors perth
gloss vinyl wrap kitchen
what is thermoforming
Navigation